- CHIPWERKE PIGGYBACK TUNING MODULE FOR
VOLKSWAGEN JETTA 2.0 TDI
(A6-MK6, CBAA, CBAB, CFFB, 2011-2014)
ChipWerke is the ultimate piggyback tuning module for the VW Jetta 2.0 TDI. It connects to several sensors of the 2.0 TDI engine to optimize the stock signal flow. ChipWerke enables a healthy boost in turbo pressure, resulting in a significant gain in horsepower and torque. Get your Jetta TDI tuned with ChipWerke for hassle-free and reliable power gains.
Power and torque increases are estimates only. Figures are dependent on variables such as fuel quality, climate, and vehicle condition.Fuel economy highly depends on driving habits.
Power and torque increases are estimates only. Figures are dependent on variables such as fuel quality, climate, and vehicle condition.
With forced induction prevalent to increase efficiency, manufacturers are now able to make software-based changes to offer different power outputs for their different models from one engine. The base hardware is almost always the same for a manufacturer’s turbocharged engine family.
Again, thanks to turbocharging, optimizing the factory-restricted settings reveals an increased output. A piggyback chip tuning box intercepts the signal flow between the engine’s several sensors and adjusts the data to remove factory restrictions for power and torque gains.
With forced induction prevalent to increase efficiency, manufacturers are now able to make software-based changes to offer different power outputs for their different models from one engine. The base hardware is almost always the same for a manufacturer’s turbocharged engine family.
Again, thanks to turbocharging, optimizing the factory-restricted settings reveals an increased output. A piggyback chip tuning box intercepts the signal flow between the engine’s several sensors and adjusts the data to remove factory restrictions for power and torque gains.
Engineered for turbocharged vehicles, the ChipWerke piggyback chip tuning box modifies the conservative stock settings. The ChipWerke module reads the data flow and alters the readings to optimize and improve boost pressure. It works within the engine’s capacity and does not harm or strain components for extreme outputs.
ChipWerke comes with mapping specifically engineered for your A3’s EA189 turbodiesel engine. You can adjust the aggressiveness of the mapping with ChipWerke’s seven preset levels (-3 to +3) to dial in the power output according to your driving style and needs. You can also control the module wirelessly from your mobile phone via Bluetooth.
Engineered for turbocharged vehicles, the ChipWerke piggyback chip tuning box modifies the conservative stock settings. The ChipWerke module reads the data flow and alters the readings to optimize and improve boost pressure. It works within the engine’s capacity and does not harm or strain components for extreme outputs.
ChipWerke comes with mapping specifically engineered for your A3’s EA189 turbodiesel engine. You can adjust the aggressiveness of the mapping with ChipWerke’s seven preset levels (-3 to +3) to dial in the power output according to your driving style and needs. You can also control the module wirelessly from your mobile phone via Bluetooth.
VEHICLE-SPECIFIC ENGINEERING
The ChipWerke piggyback tuning module is not a universal box or a rebranded 3rd party product. It runs software specifically engineered and tuned for the EA888 2.0-liter engine in the VW Tiguan.
HEALTHY DOSE OF POWER GAINS
ChipWerke delivers 20% more power and torque for the VW Tiguan's 184 HP EA888. Even more gains are possible with supporting mods, and you can also contact us for custom software.
BETTER EFFICIENCY
The increase in low-end torque will enable you to upshift earlier than stock. With the correct driving behavior, the torque boost can result in a 15% better MPG.
EASY TO INSTALL
ChipWerke installs in minutes with OEM plugs. No cutting or drilling is needed; it is completely plug-and-play and comes packaged with all the necessary attachments.
WIRELESS CONTROL
You can control the ChipWerke unit through our free mobile app via your mobile phone and make aggressiveness adjustments on the fly.
TOTAL PEACE OF MIND
ChipWerke does not bypass manufacturer-defined safety limits and does not manipulate OEM ECU codes, so it cannot damage your engine. It also comes with two years of coverage and extensive USA-based after-sales support for total peace of mind.
ChipWerke is designed specifically for your VW Jetta 2.0 TDI (A6) and connects to the rail pressure sensor. The ChipWerke harness has OEM plugs, so no wire splicing or cutting is required. The guide included in the package shows specific installation instructions for your vehicle. The basic things to consider in all applications are as follows:
Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
View DetailMake sure the ChipWerke harness is not overly stretched and is protected against water.
View DetailLocate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
View DetailMake sure that plugs are securely connected in place and that there are no unused plugs left.
View Detail
ChipWerke is designed specifically for your VW Jetta 2.0 TDI (A6) and connects to the rail pressure sensor. The ChipWerke harness has OEM plugs, so no wire splicing or cutting is required. The guide included in the package shows specific installation instructions for your vehicle. The basic things to consider in all applications are as follows:
Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
View Details
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
View Details
Make sure the ChipWerke harness is not overly stretched and is protected against water.
View Details
Make sure that plugs are securely connected in place and that there are no unused plugs left.
View Details
CHIPWERKE STAGES FOR Volkswagen Jetta - A6 ( 2011 - 2014 ) - 2.0 TDI - 140hp - CBAA, CBAB, CFFB
STOCK
HP
from the factory with its 2-liter inline-4. While this power unit offers a good performance combined with Volkswagen's optional Quattro all-wheel drive system, you can get much more out of it.
STAGE 1
HP
Increase
Difference
STAGE 2
HP
Increase
Difference