- CHIPWERKE PIGGYBACK TUNING MODULE FOR
VOLKSWAGEN GOLF 1.4 TSI
(MK7, EA211, 2019-2021)
ChipWerke piggyback tuning module delivers a significant power and torque increase without extensive modifications, wire cutting, or drilling. It is a plug-and-play solution that cannot be detected and does not leave any traces. ChipWerke runs custom software for optimizing the stock signal flow through several engine sensors.
Power and torque increases are estimates only. Figures are dependent on variables such as fuel quality, climate, and vehicle condition.Fuel economy highly depends on driving habits.
Power and torque increases are estimates only. Figures are dependent on variables such as fuel quality, climate, and vehicle condition.
With forced induction prevalent to increase efficiency, manufacturers are now able to make software-based changes to offer different power outputs for their different models from one engine. The base hardware is almost always the same for a manufacturer’s turbocharged engine family.
Again, thanks to turbocharging, optimizing the factory-restricted settings reveals an increased output. A piggyback chip tuning box intercepts the signal flow between the engine’s several sensors and adjusts the data to remove factory restrictions for power and torque gains.
With forced induction prevalent to increase efficiency, manufacturers are now able to make software-based changes to offer different power outputs for their different models from one engine. The base hardware is almost always the same for a manufacturer’s turbocharged engine family.
Again, thanks to turbocharging, optimizing the factory-restricted settings reveals an increased output. A piggyback chip tuning box intercepts the signal flow between the engine’s several sensors and adjusts the data to remove factory restrictions for power and torque gains.
Engineered for turbocharged vehicles, the ChipWerke piggyback chip tuning box modifies the restrictive stock settings. The ChipWerke module reads the data flow and alters the readings to optimize and improve boost pressure. It works within the engine’s capacity and does not harm or strain components for extreme outputs.
ChipWerke comes with mapping specifically engineered for the EA211 1.4-liter turbocharged engine found in your Golf MK7 1.4 TSI. You can adjust the aggressiveness of the mapping with ChipWerke’s seven preset levels (-3 to +3) to dial in the power output according to your driving style, fuel quality, or climate conditions. You can also control the module wirelessly from your mobile phone via Bluetooth.
Engineered for turbocharged vehicles, the ChipWerke piggyback chip tuning box modifies the restrictive stock settings. The ChipWerke module reads the data flow and alters the readings to optimize and improve boost pressure. It works within the engine’s capacity and does not harm or strain components for extreme outputs.
ChipWerke comes with mapping specifically engineered for the EA211 1.4-liter turbocharged engine found in your Golf MK7 1.4 TSI. You can adjust the aggressiveness of the mapping with ChipWerke’s seven preset levels (-3 to +3) to dial in the power output according to your driving style, fuel quality, or climate conditions. You can also control the module wirelessly from your mobile phone via Bluetooth.
UP TO 35% INCREASE IN POWER
With bolt-on upgrades and higher octane fuel, power and torque gains of up to 35% over stock are possible.
VARIOUS POWER SETTINGS
Depending on your driving style, climate conditions, or fuel quality, you can optimize ChipWerke’s map by adjusting the aggressiveness from -3 to +3.
INCREASED FUEL EFFICIENCY
The increased low-end and midrange torque will result in up to a 15% MPG increase when combined with fuel-efficient driving habits.
PLUG-AND-PLAY UPGRADE
ChipWerke is entirely plug-and-play, and the process is easy and DIY-friendly with everything supplied in the box.
WIRELESS CONTROL
You can control the ChipWerke unit through our free mobile app via your mobile phone and make adjustments on the go.
TOTAL PEACE OF MIND
ChipWerke does not flag or overwrite the Engine Control Unit (ECU), so the factory reliability stays intact. It also comes with two years of coverage, and extensive USA-based after-sales support for total peace of mind.
ChipWerke is designed specifically for your Volkswagen Golf MK7’s 1.4 TSI engine and connects with OEM-style, quality connectors at the intake manifold boost sensor and turbo boost pressure sensor in the engine bay. No drilling, wire splicing, or cutting is required. The guide included in the package shows specific installation instructions for your vehicle. The basic things to consider in all applications are as follows:
Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
View DetailMake sure the ChipWerke harness is not overly stretched and is protected against water.
View DetailLocate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
View DetailMake sure that plugs are securely connected in place and that there are no unused plugs left.
View Detail
ChipWerke is designed specifically for your Volkswagen Golf MK7’s 1.4 TSI engine and connects with OEM-style, quality connectors at the intake manifold boost sensor and turbo boost pressure sensor in the engine bay. No drilling, wire splicing, or cutting is required. The guide included in the package shows specific installation instructions for your vehicle. The basic things to consider in all applications are as follows:
Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
View Details
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
View Details
Make sure the ChipWerke harness is not overly stretched and is protected against water.
View Details
Make sure that plugs are securely connected in place and that there are no unused plugs left.
View Details
CHIPWERKE STAGES FOR Volkswagen Golf - MK7 ( 2019 - 2021 ) - 1.4 TSI - 150hp - EA211
STOCK
HP
from the factory with its 2-liter inline-4. While this power unit offers a good performance combined with Volkswagen's optional Quattro all-wheel drive system, you can get much more out of it.
STAGE 1
HP
Increase
Difference
STAGE 2
HP
Increase
Difference