- CHIPWERKE PIGGYBACK TUNING MODULE FOR
AUDI S7
(C7/4G, EA824, 2016-2018)
ChipWerke piggyback tuning module intercepts the signal from the boost pressure sensors of the S7’s 4.0 TFSI engine to re-calibrate the turbo pressure to safely and effectively increase the power and torque. The result is a significant improvement in power, torque, and acceleration without affecting driveability or reliability. ChipWerke is easy to install and connects with OEM plugs, so no wire cutting or splicing is required.
Power and torque increases are estimates only. Figures are dependent on variables such as fuel quality, climate, and vehicle condition.Fuel economy highly depends on driving habits.
Power and torque increases are estimates only. Figures are dependent on variables such as fuel quality, climate, and vehicle condition.
With forced induction prevalent to increase efficiency, manufacturers are now able to make software-based changes to offer different power outputs for their different models from one engine. The base hardware is almost always the same for a manufacturer’s turbocharged engine family.
Because of the flexible nature of turbocharging, optimizing the factory-restricted settings reveals an increased output. A piggyback chip tuning box intercepts the signal flow between the engine’s several sensors and adjusts the data to remove factory restrictions for power and torque gains.
With forced induction prevalent to increase efficiency, manufacturers are now able to make software-based changes to offer different power outputs for their different models from one engine. The base hardware is almost always the same for a manufacturer’s turbocharged engine family.
Because of the flexible nature of turbocharging, optimizing the factory-restricted settings reveals an increased output. A piggyback chip tuning box intercepts the signal flow between the engine’s several sensors and adjusts the data to remove factory restrictions for power and torque gains.
Engineered specifically for the 4.0-liter turbocharged V8 TFSI engine, ChipWerke intercepts the signal from the boost pressure sensors to optimize and modify the settings for increased turbo pressure. This results in a significant hike in power and torque, giving you a much better engine response and faster acceleration. The module does not harm or strain the engine components and does not make any permanent changes. It does not leave footprints or overwrite the original software, so ChipWerke is completely untraceable when removed.
You can adjust the aggressiveness of the ChipWerke’s settings with seven preset levels (-3 to +3) to dial in the power delivery depending on the climate, fuel quality, or your driving style and needs.
Engineered specifically for the 4.0-liter turbocharged V8 TFSI engine, ChipWerke intercepts the signal from the boost pressure sensors to optimize and modify the settings for increased turbo pressure. This results in a significant hike in power and torque, giving you a much better engine response and faster acceleration. The module does not harm or strain the engine components and does not make any permanent changes. It does not leave footprints or overwrite the original software, so ChipWerke is completely untraceable when removed.
You can adjust the aggressiveness of the ChipWerke’s settings with seven preset levels (-3 to +3) to dial in the power delivery depending on the climate, fuel quality, or your driving style and needs.
VEHICLE-SPECIFIC ENGINEERING
The ChipWerke piggyback tuning kit is engineered and tuned specifically for the S7’s V8 twin-turbo engine. It is not a generic or universal box.
FULL ADJUSTABILITY
You can optimize ChipWerke's map with seven preset levels, depending on your driving style, climate, or fuel quality.
BETTER EFFICIENCY
The increase in low-end torque will enable you to upshift earlier than stock. With the correct driving behavior, this can result in up to a 15% MPG increase.
EASY TO INSTALL
ChipWerke installs in minutes with OEM plugs. No cutting or drilling is needed, it is completely plug-and-play, and it comes packaged with all the necessary attachments.
WIRELESS CONTROL
You can control the ChipWerke unit through our free mobile app via your mobile phone and make adjustments on the go.
TOTAL PEACE OF MIND
ChipWerke does not flag the Engine Control Unit (ECU), and overwrites any stock settings. It is untraceable when removed. It also comes with two years of coverage, and extensive USA-based after-sales support for total peace of mind.
ChipWerke connects to your Audi S7 C7/4G’s boost pressure sensors. The ChipWerke harness has OEM plugs, so no wire splicing, cutting, or drilling is required. The guide included in the package shows specific installation instructions for your vehicle. The basic things to consider in all applications are as follows:
Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
View DetailMake sure the ChipWerke harness is not overly stretched and is protected against water.
View DetailLocate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
View DetailMake sure that plugs are securely connected in place and that there are no unused plugs left.
View Detail
ChipWerke connects to your Audi S7 C7/4G’s boost pressure sensors. The ChipWerke harness has OEM plugs, so no wire splicing, cutting, or drilling is required. The guide included in the package shows specific installation instructions for your vehicle. The basic things to consider in all applications are as follows:
Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
View Details
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
View Details
Make sure the ChipWerke harness is not overly stretched and is protected against water.
View Details
Make sure that plugs are securely connected in place and that there are no unused plugs left.
View Details
CHIPWERKE STAGES FOR Audi S7 - C7 ( 2016 - 2018 ) - 4.0 TFSI - 450hp - EA824
STOCK
HP
from the factory with its 2-liter inline-4. While this power unit offers a good performance combined with Audi's optional Quattro all-wheel drive system, you can get much more out of it.
STAGE 1
HP
Increase
Difference
STAGE 2
HP
Increase
Difference