ChipWerke Piggyback Tuning Module for

AUDI S5 CABRIO & SPORTBACK B8-8T, B8.5-8.5T

2009-2016, 3.0 TFSI supercharged V6 (CAKA)

Stock 329 HP

Stage 1 +50 WHP

Stage 2 +81 WHP

Power and torque increases may vary. Figures depend on many variables, such as fuel quality, altitude, and vehicle condition. Fuel economy highly depends on driving habits.

View Installation Guide Dyno Results

$349.99

$449.99

SAVE 22%

ADD TO CART

The ChipWerke piggyback tuning module is the best ECU tuning alternative that is easily reversible. It connects to the MAP/IAT sensors of the 3-liter supercharged V6 of your S5 Sportback or Cabrio and intercepts the sensor readings to modify and recalibrate them. The optimized signal flow increases the boost pressure, resulting in a significant horsepower and torque gains. ChipWerke’s Stage 1 delivers an extra 50-wheel horsepower, and up to 81 WHP is possible with supporting mods. Get better 0-60 acceleration with no TD1 or other diagnostic flag risks—ChipWerke is the ultimate plug-in performance upgrade for the Audi S5 Sportback and Cabrio that still keeps the factory ECU parameters intact.

Also compatible with: 2009-2016 Audi S4, 2013-2017 Audi S5 Coupe

WHY CHOOSE CHIPWERKE PIGGYBACK MODULE

Significant Power Gains

ChipWerke increases power output by 50 WHP with Stage 1 and 81 WHP with Stage 2. Get better 0-60 times and an optimizedpower delivery throughout the entire RPM band.

Stage 2 Tune for Extra Mods

Get in touch for a custom Stage 2 software. With supporting mods like an intake kit, exhaust, smaller s/c pulleys, etc., the ChipWerke Stage 2 can deliver up to 81 WHP.

Completely Untraceable

ChipWerke is completely untraceable when removed. It leaves no traces or flags behind, including the Audi/VAG TD1 diagnostic code.

Wirelessly Adjust Your Tune

Fine-tune the performance with seven preset levels and optimize the power increase on the fly through the free mobile app.

Better Fuel Economy

Improves low-end torque so the engine maintains speed with less effort, resulting in up to 15% better fuel economy.

Plug-and-Play Installation

Simple DIY installation in under 15 minutes. It requires no special tools, wire cutting or splicing, or permanent modifications.

Does Not Overwrite Stock ECU

Factory ECU remains unaltered, meaning you get a hassle-free performance upgrade while OEM safety measures continue to function as normal.

Extensive Customer Support

ChipWerke comes with two years of manufacturer’s warranty and extensive USA-based after-sales support for total peace of mind.

HOW DOES CHIPWERKE PIGGYBACK MODULE WORK

The ChipWerke piggyback tuning module intercepts both intake pressure sensors of your S5 Sportback & Cabrio’s 3.0-liter supercharged V6. The module runs custom software engineered specifically for the V6 TFSI engine and recalibrates the sensor data to increase the boost pressure, resulting in more horsepower and torque throughout the entire RPM range.

ChipWerke is a completely safe and reversible alternative to ECU tuning. It operates within the factory parameters and does not permanently alter the stock ECU, boosting power and torque without affecting OEM reliability. The free mobile app allows you to fine-tune the mapping with seven preset levels (from -3 to +3) to optimize the power output for your driving style, varying fuel quality, or altitude.

EASY PLUG-AND-PLAY INSTALL

The ChipWerke piggyback tuning module connects to your Audi S5’s MAP/IAT sensors at each side of the supercharged 3.0 TFSI V6 engine. It intercepts the factory wiring harness with OEM-quality plugs, so no wire splicing, cutting, drilling, or permanent modifications are required. The guide included in the package shows specific installation instructions for your vehicle.

The basic things to consider in all applications are as follows:

Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
Make sure the ChipWerke harness is not overly stretched and is protected against water.
Make sure that plugs are securely connected in place and that there are no unused plugs left.

View Installation Guide

CONTROL BY MOBILE APP

You can download and install ChipWerke’s free mobile app from Apple AppStore and Google Play Store. After pairing your unit via Bluetooth, you can control the ChipWerke wirelessly and make adjustments on the go. The app's easy-to-use interface lets you wirelessly fine-tune the boost pressure with ChipWerke’s different levels (-3 to +3), add multiple units and control them from under one roof, check and download software updates, and reach out to us for live support.