ChipWerke piggyback tuning module is the best plug-and-play performance mod for the Audi Q5 3.0T. It improves power and torque without a permanent ECU tune. ChipWerke connects to the intake manifold pressure sensors of the 3.0-liter supercharged V6 of your Q5 and recalibrates the signal flow for increased boost pressure. Stage 1 tune delivers 45 HP over stock, and up to a 35% increase is possible with custom Stage 2 software and supporting bolt-on mods. ChipWerke is completely untraceable and does not cause TD1 code or affect reliability. It comes with a 2-year product warranty and extensive USA-based customer support.

Also compatible with: 

WHY CHOOSE CHIPWERKE PIGGYBACK MODULE

Significant Power Gains

ChipWerke increases power output by 45 HP with Stage 1 and up to 35% with Stage 2, delivering faster acceleration and better power delivery throughout the entire RPM band.

Stage 2 Tune for Supporting Mods

Contact us for custom Stage 2 software to use with supporting mods such as intake, exhaust, smaller s/c pulleys, etc. for up to 35% more horsepower.

Completely Untraceable

Because the stock ECU stays untouched, ChipWerke leaves no traces or diagnostic flags when removed, including the Audi/VAG TD1 code.

Wirelessly Adjust Your Tune

Fine-tune the performance with seven preset levels and optimize the power increase on the fly through the free mobile app. 

Better Fuel Economy

Improves low-end torque so the engine maintains speed with less effort, resulting in up to 15% better fuel economy.  

Plug-and-Play Installation

Simple DIY installation in under 15 minutes. It requires no special tools, wire cutting or splicing, or permanent modifications. 

Does Not Overwrite Stock ECU

Factory ECU remains unaltered, meaning you get a hassle-free performance upgrade while OEM safety measures continue to function as normal.

Extensive Customer Support

ChipWerke comes with two years of manufacturer’s warranty and extensive USA-based after-sales support for total peace of mind.

HOW DOES CHIPWERKE PIGGYBACK MODULE WORK

The ChipWerke piggyback tuning module connects to the factory wiring harness to alter the readings from the MAP/IAT sensors at both sides of the 3-liter V6 supercharged TFSI engine. It is a safe and reversible alternative to ECU tuning. ChipWerke intercepts and optimizes the stock signals to modify boost pressure, increasing horsepower and torque.


It works within factory parameters and does not permanently alter the stock ECU, so ChipWerke boosts power output while retaining OEM reliability. The mapping can be fine-tuned with seven preset levels (-3 to +3) easily via the mobile app to optimize the power increase for your driving style, varying fuel quality, or altitude changes.

EASY PLUG-AND-PLAY INSTALL

The ChipWerke piggyback tuning module connects to the Q5 3.0T’s manifold pressure sensors at each side of the TFSI engine block. It intercepts the factory wiring harness with OEM-quality connectors, and no wire splicing, cutting, or permanent drilling is required. The guide included in the package shows specific installation instructions for your vehicle.

The basic things to consider in all applications are as follows:

  • Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
  • Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
  • Make sure the ChipWerke harness is not overly stretched and is protected against water.
  • Make sure that plugs are securely connected in place and that there are no unused plugs left.

CONTROL BY MOBILE APP

You can download and install ChipWerke’s free mobile app from Apple AppStore and Google Play Store. After pairing your unit via Bluetooth, you can control the ChipWerke wirelessly and make adjustments on the go. The app's easy-to-use interface lets you wirelessly fine-tune the boost pressure with ChipWerke’s different levels (-3 to +3), add multiple units and control them from under one roof, check and download software updates, and reach out to us for live support.

Power Adjustment

Power Adjustment

Software Update Check

Software Update Check

Download Software Updates

Download Software Updates

Bluetooth Pairing

Bluetooth Pairing

My Car Menu

My Car Menu

Live Support

Live Support

Power Adjustment

Easily adjust power delivery from -3 to +3.

Software Update Check

Check for the latest software updates

Download Software Updates

Download and install the latest updates.

Bluetooth Pairing

Pair multiple ChipWerke units.

My Car Menu

Switch between and control your multiple ChipWerke devices under one roof.

Live Support

Reach out to us for help or troubleshooting within the app.