ChipWerke Piggyback Tuning Module for

Audi Q5 8R

2014-2016, 3.0 TDI (CCWA)

Stock 239 HP

Stage 1 +50 HP

Stage 2 up to 35% HP

Power and torque increases may vary. Figures depend on many variables, such as fuel quality, altitude, and vehicle condition. Fuel economy highly depends on driving habits.

$349.99

$449.99

SAVE 22%

ADD TO CART

The best plug-and-play performance upgrade for the Audi Q5 3.0 TDI, the ChipWerke piggyback tuning module installs in minutes with top-quality connectors. It connects to the rail pressure sensor of the 3.0-liter V6 TDI engine and recalibrates the stock signal flow for better turbo pressure. ChipWerke increases the power by 50 HP with Stage 1, and up to 35% more power is possible with a Stage 2 tune. ChipWerke is completely untraceable and does not leave flags on the factory ECU. It comes with a 2-year product warranty and extensive USA-based customer support.

WHY CHOOSE CHIPWERKE PIGGYBACK MODULE

Significant Power Gains

ChipWerke increases power output by 50 HP with Stage 1 and upto 35% is possible with Stage 2 with added bolt-on performance upgrades. It unlocks faster acceleration and better power delivery throughout the entire RPM band.

Stage 2 Tune for Supporting Mods

Contact us for custom Stage 2 software to use with supporting mods such as intake, exhaust, smaller S/C pulleys, etc. for up to a 35% HP increase.

Completely Untraceable

Because the stock ECU stays untouched, ChipWerke leaves no traces or diagnostic flags, such as the Vag/Audi TD1 code, causing no dealership drama.

Wirelessly Adjust Your Tune

Fine-tune the performance with seven preset levels and optimize the power increase on the fly through the free mobile app.

Better Fuel Economy

Improves low-end torque so the engine maintains speed with less effort, resulting in up to 15% better fuel economy.

Plug-and-Play Installation

Simple DIY installation in under 15 minutes. It requires no special tools, wire cutting or splicing, or permanent modifications.

Does Not Overwrite Stock ECU

Factory ECU remains unaltered, meaning you get a hassle-free performance upgrade while OEM safety measures continue to function as normal.

Extensive Customer Support

ChipWerke comes with two years of manufacturer’s warranty and extensive USA-based after-sales support for total peace of mind.

HOW DOES CHIPWERKE PIGGYBACK MODULE WORK

The ChipWerke piggyback tuning module connects to the factory wiring harness to alter the readings from the common rail sensor of the 3-liter V6 diesel engine. A safe and reversible alternative to ECU tuning, ChipWerke only intercepts and optimizes the stock signals to modify boost pressure, increasing horsepower and torque.

It works within factory parameters and does not permanently alter the stock ECU, so ChipWerke boosts power output while retaining OEM reliability. The mapping can be fine-tuned with seven preset levels (-3 to +3) easily via the mobile app to optimize the power increase for your driving style, varying fuel quality, or altitude changes.

EASY PLUG-AND-PLAY INSTALL

The ChipWerke piggyback tuning module connects to the Q5 3.0 TDI’s 3-pin rail pressure sensor. It intercepts the factory wiring harness with OEM-quality connectors; no wire splicing, cutting, or permanent drilling is required. The guide included in the package shows specific installation instructions for your vehicle.

The basic things to consider in all applications are as follows:

Turn off the engine and wait for it to cool down. Leave the driver’s door open for 15 minutes while keeping the keyfob at least 35 feet away from the car to ensure the ECU shuts down completely.
Locate where you want to mount the module. Make sure that it is away from the areas that tend to heat up relatively more.
Make sure the ChipWerke harness is not overly stretched and is protected against water.
Make sure that plugs are securely connected in place and that there are no unused plugs left.

View Installation Guide

CONTROL BY MOBILE APP

You can download and install ChipWerke’s free mobile app from Apple AppStore and Google Play Store. After pairing your unit via Bluetooth, you can control the ChipWerke wirelessly and make adjustments on the go. The app's easy-to-use interface lets you wirelessly fine-tune the boost pressure with ChipWerke’s different levels (-3 to +3), add multiple units and control them from under one roof, check and download software updates, and reach out to us for live support.